TV Set-Top Box Self-Installation

Learn how to set up your Tbaytel TV Set-Top Box.

If you have a Tbaytel set-top box that requires self-installation, factory reset, or disconnected your set-top box, please follow the steps below to connect your Tbaytel TV service.

Please ensure you have your Tbaytel Internet SSID (WiFi network name) and password ready when connecting your Tbaytel set-top box.

  1. Set-Top Box Placement
    Position your set-top box (STB) in a location:
    • Close to your TV and power outlet
    • Within WiFi range or ethernet outlet
    • Off the ground that allows airflow
    Keep the set-top box within eye sight while connecting. You may move out of eyesight once complete.
  2. Connect Your STB
    • Connect the HDMI cable from the HDMI output of the set-top box to the HDMI input of your TV.
    • Connect the power adapter to the DC power input of the set-top box, then insert the power adapter plug into your power outlet.
    Turn on your TV and switch to the HDMI input your set-top box is plugged into using your TV manufacturer remote.
  3. Activate Batteries in Remote
    Pull out the plastic tab to activate batteries.
  4. Set Up Your Set-Top Box
    Follow the on-screen instructions to set up your STB, pair your remote to the STB, and to pair your remote to control the power and volume on your TV (if compatible).
    Once complete with the on-screen instructions, you will be presented with the Tbaytel TV Home Screen along with your subscribed programming.
  5. Enjoy!

 

Download the TV Self-Installation Guide here.

Glad we could be helpful. Thanks for the feedback.

Sorry we couldn't be helpful. Your feedback will help us improve this article.

How helpful was this page?

  
Updated on Wed, 28 Aug 2024 by Sean Otway

Rendered by:WWW-C01-PRD-01.